Dry Cabinet for Integrated Circuits

Description

Dry cabinets for integrated circuits can protect moisture-sensitive electronic components from environmental damage. By maintaining controlled low-humidity conditions and providing ESD protection, these cabinets ensure the reliability, and performance of stored ICs. Investing in a high-quality dry cabinet can enhance your manufacturing and research.

Dry Cabinet for Integrated Circuits: Specification

Model# with F: ESD safe function, dark blue color.

Model# without F: No ESD safe function, off white color.

Dry Cabinet for Integrated Circuits: Design

● Module design: Each module can be replaced individually.

● Environment-friendly design: Old modules can be removed and shipped back to the original factory for replacement.

● Flexible design: Customers can select options, such as an over-humidity buzzer alarm, data logger, door-opening buzzer alarm, and three-color flashing light.

Dry Cabinet for Integrated Circuits: Features

● Use +/-2%RH high-precision temperature and humidity sensor imported from Switzerland.

● With a memory function, no need to reset after powering off.

● Powerful drying device with a service life of more than 15 years.

● Low-humidity dry storage cabinet to dehumidify IC and prevent micro-cracks.

● Swivel casters with brakes, anti-static.

Climatest Symor® dry cabinet for integrated circuits:  Working principle

Traditional desiccants are consumables, which always need replacement, and very inconvenient, Climatest Symor® auto dry cabinet, dry cabinet for PCB, PCBA use molecular sieve inside dry units, the molecular sieve is the most effective and environment-friendly desiccant, it can be regenerated in use, no need replacement. The whole dehumidifying process is microcomputer controlled, when the interior humidity is high, it will start to absorb moisture; when the humidity reach the setting value, it will stop absorbing, and then discharge the moisture to outside, it is automatic.

<3%RH series dehumidifying speed:

Under ambient 25 degrees C, humidity 60%RH, open door 30 seconds and then close, the humidity will recover to <3%RH within 30 minutes, see the chart below:

Dry cabinet for integrated circuits, PCB and PCBA: Application

During the SMT overflow process, if there is moisture inside IC packages, it 100% causes micro-cracking, the interior die is damaged, the wirings malfunction, plastics are separated from the die or lead frame, and these defects are not easy to notice in the early stage, some damages extend to the surface, you will see cracking like below pictures, the maintenance is troublesome and even waste of the assembly, these invisible, potential problems must enter into the market, then faculty products return and complains.

IPC/JEDEC J-STD-033 standard specifies“Standard for Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices.”, it require low humidity storage for moisture sensitive components.

Dry cabinets can store MSDs to prevent them from absorbing moisture, which can lead to defects such as "popcorning" during solder reflow, it maintains a relative humidity (RH) level below 10%, which is essential for preserving the integrity of moisture-sensitive components, helping you solve micro-cracks problems, and improve your productivity, a small investment gives you a big return.

Advantages

● All the models can maintain <3%RH automatic
● Wide range of dry cabinets with different sizes for your selection
● Conforms to IPC/JEDEC J-STD-033 standard
● Dehumidifying semiconductor components to prevent popcorn/micro-cracking
● Options like over-humidity buzzer alarm, open door buzzer alarm, data logger
● ESD safe

We provide dry cabinets for integrated circuits to below industries:

FAQ

Q: Are there comments or testimonials from other customers?

A: Yes, we have received great feedback from customers in different countries.

Q: What are common issues reported by users?

A: It works reliably without any issues.

Q: How responsive is the company to customer feedback and complaints?

A: Within 12 hours.

Q: Is the product easy to purchase?

A: Yes, we have standard models in stock, and the production lead time is seven working days.

Q: What are the delivery options and times?

A: We provide door-to-door and seaport-to-seaport service, and we decide whether to transport by sea, air, or truck according to your timeliness.

Q: How much does a dry storage cabinet cost?

A: The price depends on the humidity series and quantity you need.

For more details about dry storage cabinets, please visit our website www.climatestsymor.com, or send an email to sales@climatestsymor.com. We will reply to you as soon as possible and welcome possible cooperation.